Resumo em Inglês:

Abstract In this work we evaluate the physical-mechanical behavior of lateritic soil with addition of carbon nanotubes. The soil was collected in a commercial deposit located in Rio Branco – AC and later characterized through particle size tests, X-Ray Diffraction, X-Ray Dispersion Spectroscopy and Tropical Compressed Miniature essay. The dispersion of nanotubes in solution was carried out and the size of the nanoparticles was verified using Dynamic Light Spreading - DLS, Zeta Potential and PDI. Three percentages of additions (0.05%, 0.1% and 0.2%) of carbon nanotubes were evaluated and compared with the control group according to the parameters of Atterberg limits, real density, dry density maximum and optimum humidity. The results indicate that the soil has a clayey behavior with a medium texture, with the presence of clay mineral kaolinite in its composition and silicon and iron oxides. The dispersion of carbon nanotubes reached particles with an average hydrodynamic diameter of 68.9 nm and Zeta Potential of -24.87 mV and PDI of 0.231, characterizing a solution as moderately dispersed and kinetically stable. The results of the liquidity limit and plasticity tests showed a reduction of 10 and 13%, respectively, with the addition of carbon nanotubes, while for the parameters of plasticity index, real specific mass, maximum dry density and optimal moisture, they did not show significant variation. Carbon nanotubes interact with soils with lateritic behavior, and further studies are essential to better understand the mechanisms behind this interaction.

Resumo em Inglês:

Abstract Dispersivity is a severe pathology that occurs mainly in clay soils and is usually catastrophic in geotechnical structures susceptible to this damage. Hundreds of dams worldwide have failed due to quality problems, mainly by piping in the body, foundation, spillway, culvert, and other peripheral structures. The pinhole test is currently considered the most accurate test for detecting the dispersivity of clay soils. However, it presents problems when objectively evaluating the dispersivity of a material due to the qualitative nature of the estimation of results. In particular, the methodology for determining turbidity has been identified. This document studies different piping paths in the sample, which a priori may be more realistic than the single path in the current test. A kaolinitic clay, widely studied through index and mineralogical tests, is used as the base material. Regarding the detection of dispersivity, a specialized test package was used to reduce the uncertainty of the results. Natural samples were analyzed using ASTM D4647-13. A modification of the pinhole test was proposed based on the imposition of additional artificial channels. The results revealed that this modification can make the test more realistic because when the dispersive front advances in the soil, it does not travel along a single path but instead looks for different erosive paths. The details of this assertion are discussed throughout the paper.

Resumo em Inglês:

Abstract Recycled construction and demolition waste (RCDW) has demonstrated geotechnical properties that encourage it to be used in reinforced soil structures (RSS) with geosynthetics. However, the interaction between RCDW and reinforcements needs to be better understood, given its importance for design. This paper presents a qualitative study on the interaction between geogrid and recycled sands by means of pull-out tests performed on small equipment. Tests with the same degree of compaction and a geogrid buried in different types of recycled and natural sands (for comparison purposes) were performed. The characterisation of the materials was carried out in the laboratory and the variability of their geotechnical properties was evaluated. In addition, fill material moisture content was investigated as another potential factor influencing soil-geogrid interface shear. The results of the pull-out tests demonstrated the specific influences of the factors investigated. The comparative study showed that recycled sands can be suitable materials to be used as backfill in geosynthetic reinforced soil structures, meeting physical, mechanical and environmental requirements for this kind of work.